1.High voltage:
the working voltage is generally 3.6V,3.8V and 4.2V, much higher than traditional batteries.
2. Stable discharge performance:
to provide a stable voltage output to ensure the normal operation of the equipment.
3. High energy density:
18650 Lithium battery has high energy density and can provide lasting power supply.
4. High charging efficiency:
support fast charging technology, and full charge in a short time.
5. Small volume and light weight:
suitable for being embedded in various portable devices, without adding too much burden.
6. Superior low temperature performance:
it can work normally at-40℃ or even lower temperature, with high discharge efficiency.
7. Moderate capacity:
the capacity is generally about 2800 mAh, and some high-end products can reach 3300 mAh.
8. High safety performance:
no explosion, no combustion, non-toxic, pollution-free, through the RoHS certification.
9. Long cycle life:
it can repeatedly charge and discharge for many times, and the cycle life can reach more than 500 times.
10. No memory effect:
it can be charged without emptying the remaining power, which is easy to use.
PRODUCT DETAILS
SAFETY TESTING
Additionally, the battery’s design allows for efficient energy storage, making it suitable for renewable energy applications
such as solar and wind energy systems. With the global push towards clean energy, 18650 Lithium Battery.
the role of energy storage solutions like the 18650 battery becomes increasingly important.
Our product not only aligns with this trend but actively contributes to the advancement of sustainable technologies.
At Guangdong Jiawei, we understand that performance and reliability are paramount for users who depend on stored energy.
The 18650 ternary lithium battery -32P boasts an impressive energy density and cycle life,
ensuring that it provides long-lasting power for a variety of devices—from electric vehicles to portable electronics.
This superior performance is achieved through rigorous research and development efforts,
which have led us to refine our manufacturing processes continually.
ARGUMENT
FACTORY & WAREHOUSE
CERTIFICATES
JW1.5Ah 2.0Ah 2.2Ah 2.6Ah 3.7V IEC62133
JW1.5Ah-2.0Ah-2.2Ah-2.6Ah-3.7V-IEC62133 Certificate
JW5Ah-2.0Ah-2.2Ah-2.6Ah-3.7V-IEC62133 Test Report
JW18650-2600mAh-3.7V-BIS Test Report
JW18650-2600mAh-3.7V-BIS Certificate
JW18650-2600mAh-3.7V-PSE-Table 12 Report-MCM
Faq
Q:
Will high temperature lithium batteries explode?
A:
High temperature lithium batteries have a certain risk of explosion, but not all high temperature lithium batteries will explode.
The safe use temperature of lithium batteries is between 20 degrees Celsius and 60 degrees Celsius. Using lithium batteries
in a high temperature environment may trigger a chemical reaction inside the battery, resulting in the release of chemicals
inside the battery, thus increasing the risk of battery explosion.
However, most lithium batteries can still be used safely even at high temperatures. In order to ensure the safe use
of lithium batteries, you need to pay attention to the following points during use:
Avoid exposing lithium batteries to high temperatures for long periods of time, such as prolonged exposure to the hot sun or use in airtight electronic product cases.
2. Avoid mixing lithium batteries of different brands, specifications and capacities, as this may lead to short-circuiting
of the battery management chip, thus triggering an explosion.
3. Avoid overcharging or over-discharging during use, which may damage the battery management chip and increase
the risk of battery explosion.
4. In the process of using the battery should be kept well ventilated and heat dissipation, to avoid overheating of the battery.
In short, high-temperature lithium batteries have a certain risk of explosion, but as long as they are used correctly and cared for, this risk can be reduced.
Q:
What is the auto repair function of low temperature lithium battery?
A:
The automatic repair function of low temperature lithium battery means that the battery can still work normally in
low temperature environment and can be repaired automatically when failure occurs. This function is very important
for electronic products used in extreme environments, such as outdoor equipment in cold regions, automotive
electronics, spacecraft and so on.
The main principle of the low-temperature lithium battery auto-repair function is to add a special chemical substance
inside the battery in order to increase the conductivity of the battery in a low-temperature environment so as to
improve the efficiency of the battery. At the same time, this chemical substance can also be in the battery failure,
automatically repair the battery damage, to ensure the service life of the battery.
In conclusion, the low temperature resistant lithium battery auto-repair function is a technology that improves
the efficiency and lifespan of batteries in low temperature environments through special chemicals. This technology
plays an important role in improving the performance and reliability of electronic products and is widely used in various fields.
Q:
There are several welding methods for lithium batteries?
A:
Lithium battery welding methods are mainly the following:
Laser welding: laser welding uses a high-energy laser beam to irradiate on the battery cell, causing it to melt to form a welded joint. This welding method can realize efficient and precise welding, and will not cause thermal damage to the battery.
2. ultrasonic welding: ultrasonic welding uses high-frequency vibration energy to weld the battery cells together.
This welding method can realize efficient and precise welding, and will not cause thermal damage to the battery.
3. Resistance Welding: Resistance welding utilizes high voltage, low current electrical energy to generate heat through
the welding electrodes, melting the battery cells to form a welded joint. This welding method can realize efficient and
precise welding, but may cause thermal damage to the battery.
4. Laser spot welding: Laser spot welding utilizes a high-energy laser beam to irradiate the battery cells, causing them
to melt and form a welded joint. This welding method can realize efficient and precise welding, and will not cause thermal
damage to the battery.
In short, the welding method of lithium battery needs to be selected according to different product requirements and
material properties. When selecting the welding method, it is necessary to take into account the welding quality, production
efficiency, cost control and other factors.
Related Products
